Features + Benefits
Features + Benefits
Made exclusively for the Pro Painter
Outstanding Paintability with Latex & Oil-Based Paints
Fast Paint Ready Times
Resists cracking, dirt pick up & paint glossing
Uses + Applications
Window & Door Perimeters
Molding & Trim
Wall & Corner Joints
Power Point Products
DAP® POWER POINT® 300 High Performance Acrylic Urethane Elastomeric Sealant
DAP® POWER POINT® 300 High Performance Acrylic Urethane Elastomeric Sealant is a versatile, premium elastomeric sealant ideal for sealing a wide range of interior and exterior applications.VIEW PRODUCT
DAP® POWER POINT® 230 Advanced Elastomeric Acrylic Latex Sealant
DAP® POWER POINT® 230 ADVANCED ELASTOMERIC ACYRYLIC LATEX SEALANT is specifically formulated for demanding interior and exterior applications, especially molding & trim applications.VIEW PRODUCT
DAP® POWER POINT® 210 Fast Dry Acrylic Latex Caulk with Silicone
DAP® POWER POINT® 210 FAST DRY ACRYLIC LATEX CAULK WITH SILICONE is an excellent quality, fast drying caulk designed exclusively for the professional painting contractor.VIEW PRODUCT
DAP® POWER POINT® 200 All Purpose Acrylic Latex Caulk with Silicone
DAP® POWER POINT® 200 ACRYLIC LATEX CAULK WITH SILICONE is an excellent quality, all purpose caulk designed exclusively for the professional painting contractor. It contains silicone additives for greater flexibility and adhesion and provides a durable, waterproof seal.VIEW PRODUCT
DAP® POWER POINT® 100 Acrylic Latex Caulk
DAP® POWER POINT® 100 is an all-purpose acrylic latex caulk designed exclusively for the professional painting contractor.VIEW PRODUCT
Proper Surface Preparation is Key
Remove any old caulk from the seam or joint by cutting or scraping it away. Then clean the area with soap and water to remove dirt, dust, grease or debris. Rinse thoroughly. Make sure the area to be sealed is clean and dry to ensure good adhesion.
Get a Professional-Looking Finish
To get a professional-looking finish after the sealant has been applied, smooth the bead of sealant with a caulk finishing tool dipped in water. Do this before the sealant starts to skin over, about 2-5 minutes.
Want straight lines?
Apply painter’s masking tape to either side of the joint before applying the sealant. Remove the tape before the sealant skins over – about 2-5 minutes. To remove, lift the edge up at a 45° angle and pull away from you.