DAP^® 3.0™ GUTTER & FLASHING

Best For:

Crystal clear, high performance, all weather sealant for gutter and flashing applications that stays flexible and crackproof.

Key Features

100% Waterproof & Weatherproof
30 Minute Rain Ready
Extreme Temp Application
Lifetime Guarantee

WHERE TO BUY

DETAILS + SPECIFICATIONS

Details
Sizes & Colors

sizes

9 FL OZ
Colors Available in this size

CRYS CLEAR
Features & Benefits

100% waterproof & weatherproof

30 minute rain ready

30 minute paint ready

Extreme temperature application: 20°F to 120°F

Wet/damp surface adhesion

Shrink & crack proof

Maximum adhesion & flexibility

Low odor

Meets ASTM C920, Class 25

Lifetime guarantee

Specifications

SKU	Code	Unit Size	Color	Dimensions	Weight	Case Pack	Cases/Pallet
7079818377	18377	9 FL OZ	CRYS CLEAR	8x6x12	12.15 lbs.	12	108

RESOURCES + FAQs

Technical Data

Data Sheets

SDS	Material Safety Data Sheet #1160801	EN ES
TDS	Crys Clear	EN ES

Certifications & Compliance

How To's/Tips

Want straight lines?

Apply painter’s masking tape to either side of the joint before applying the sealant. Remove the tape before the sealant skins over – about 2-5 minutes. To remove, lift the edge up at a 45° angle and pull away from you.

Gap more than 1/2" deep?

If the gap you are sealing is more than 1⁄2” deep, insert foam backer rod into the joint prior to applying the sealant. This will ensure adequate adhesion and prevent cracking.
FAQs

What paints are compatible with DAP® 3.0™ High Performance Sealant?

Acrylic latex-based paints are compatible. Priming with an acrylic latex primer is necessary before painting with oil-based paints.

How do I clean Up DAP® 3.0™ High Performance Sealant?

Excess uncured DAP® 3.0™ High Performance Sealants can be cleaned up from surfaces or tools using mineral spirits. Once they have cured, any excess sealant needs to be cut or scraped away.

If I only use half of a cartridge, can I use the other half at a later date? If so, what are the proper storage conditions?

Yes. You can use the remaining product after the cartridge is opened if stored properly. The cartridge should be stored below 80°F in a dry place. When ready to use again, remove the cured material at the tip or cut the tip back to reveal fresh product.

Where To Buy

Resources + Support

Find Resources

Find what you need for your next job or project.

Search Resources

Customer Support

Our team of highly trained customer support staff is here to help with either product or project advice.

Contact Us

Chat with usLiveChat